It doesn’t matter how amazing that shower looks. If the water pressure is low, your bathroom really steals a great shower experience away from you. Nothing can be as frustrating as standing under the shower head as water trickles out, barely able to rinse away the shampoo and soap from your body. Luckily, there are plenty of ways on how to increase water pressure and finally have that welcoming shower experience everybody wants.
These 7 steps on how to increase water pressure in the shower are for beginners or the seasoned weekend warrior in all of us.
Step 1. Remove the Aerators
The manufacturer installs the aerators directly into the shower head with the purpose to pump more air into the water stream in their minds. The aerator gives users a wetter shower experience. However, this comes at a price. This tiny system reduces water pressure.
Removing the aerator is a simple process. It requires removing the shower head in the first place. Be sure to have at hand a roll of Teflon tape, aka plumbers tape, to reinstall the shower head. In most shower heads, the aerator may look like a small plastic washer that can be popped out with a screwdriver.
Since every shower head is different, just refer to the owner’s manual to find where the aerator is located. If the desired pressure is not achieved, the aerator can be put back in easily.
Step 2. Unclog the Shower Head
Perhaps the reason for the low flow of water out of the shower head could be a result of the tiny nozzles being clogged. Things like salt, gunk, and sediment can slowly build up in the shower head. These blocking particles are keeping water from flowing properly.
It is always best to clean the shower head when it is off of the wall, so remove it carefully. Place the shower head in bowl of cleaner for a few hours. Once the solution has loosened the clogs, a soft toothbrush can remove the rest. If you see blockages inside each individual jet, use a wooden toothpick or sewing needle to break the contaminants free.
Use extra care not to scratch the chrome finish of the show head while trying to clear and clean the jets.
Step 3. Remove the Flow Regulator
The flow regulator was added to newer shower heads to control the flow of water where certain restrictions apply. These regulators are installed in the shower head. Nonetheless, they can be removed at the discretion of the homeowner.
Determine first the model of the shower head. Afterwards, refer to your owner’s manual or simply look online to see schematics on where the regulator is located and what it looks like. The majority of these regulators are a brighter color than any other parts inside the shower head. This is why it should be simple to locate.
How to increase water pressure in this instance is simple. Remove the small regulator. That should definitely improve the shower experience.
Step 4. Replace the Shower Head
Although this is technically not a full repair, it’s an easy way on how to increase water pressure in the shower. Many new shower heads are designed for water-efficiency. Therefore, they come with those regulators and aerators inside. All these additions are decreasing the flow of the water.
Some shower heads are a challenge to open to find these parts. As a result, a quick fix is to buy a cheaper and older style shower head. The older style shower head might not have all those new bells and whistles. In this case, water flows out as fast as it flows in. Another thing to consider is that there are new shower head models that are sold as high-pressure. These units have tinier openings that force the water through and increase the pressure instantly.
To fix this problem, you screw off the old shower head, apply the Teflon table to the pipe, and screw on the new shower head. Within minutes, you will be enjoying a high-pressure shower. High-pressure shower heads deliver maximum water pressure and are available in different styles.
Step 5. Fix Water Leaks
Those wondering how to increase water pressure in the shower might want to look at the pipes around the house before doing anything else. If there is any sort of leak anywhere in the home, it takes away from the overall water pressure in the shower.
There may be leaks under sinks, behind the shower wall, and anywhere two pipes connect. The solution could also be as simple as the Teflon tape at a connection point leaking, needing a new section of tape to seal that leak.
When you suspect that the water is leaking, it is best to contact a professional. They can quickly test the pipes and locate that leak for you.
Step 6. Reduce Water Consumption
If you are still trying to learn how to increase water pressure and are not having success, consider looking around at how water is being used when you are in the shower. The trouble with your water pressure in the shower could simply be a result of bad timing.
Perhaps you take your shower after work when your get things perfect. It c wife is running the dishwasher, the kids are all taking their showers, and a load of laundry is being washed. With so many things happening at the same time you are in the shower, it’s no wonder you feel like you are showering while standing outside when it drizzles.
Take your shower at times when water consumption in the house is low, maybe right before bed. If you notice the pressure is significantly stronger at these times, problem solved.
Step 7. Adjust the Main Shut-Off Valve
The main water shut-off valve regulates how much water flows into your home. Make certain the valve is open all the way. Otherwise, it could have a negative impact on the water pressure in the shower. Opening up the water shut-off valve all the way eliminates your problem. It is a quick fix anyone can easily handle.
These 7 tips on how to increase water pressure might require a bit of trial and error before you get things perfect. It could be one or a combination of a few of these things that will correct the problem. If you have a few tricks to increasing water pressure we haven’t discussed here, please feel free to share your experience.