The drain hose is one of the most critical elements of a washing machine. It is an important device that helps to regulate your water. As a result, it is essential to know how to install a washing machine drain hose if it gets broken. Learning this new procedure will allow you to replace a broken or worn one rather quickly and easily.

In this article, we will discuss the tools that you need to finish this job and the steps required for mastering how to install a washing machine drain hose. By the time you are done reading this article, you will know how to install a washing machine drain hose and will be able to replace one without much work.

1. Collect Your Equipment

There are several items you need to collect before you try mastering how to install a washing machine drain hose. The first is a new drain hose. You can usually buy these at most hardware stores. In some cases, you may have to contact the manufacturer to find a replacement. Make sure to consult your manual to find the proper model for your washing machine.

Next, you’ll need some paper, a pencil, an adjustable wrench, a bucket, pliers, screwdriver, and at least one clamp. All of these items will help make it easier to master how to install a washing machine drain hose. Just as importantly, they can make it simpler to perform these repairs without any significant difficulty or complications during the process.

2. Write down the Appliance Specifications

Take the time to carefully find the specifications for your washing machine and to write them down on your paper. These items are typically found in your owner’s manual. The information will make it easier for you to find and purchase a drain hose. However, you may have to take down the model and serial number as well.

Take these details to an appliance store to get a drain hose that fits your machine. Some may have the tube in stock, but others may require a special order. Make sure your washing machine is operable before starting this process to ensure you can continue to wash your clothes.

3. Prepare the Job

Before you start learning how to install a washing machine drain hose, it is important to know how to prepare the setting for this procedure. Start by unplugging the machine and turning off the water supply line. This line is usually installed behind the body of your washing machine. It features a valve that you can easily turn on with your hand or a wrench.

Perform these steps to avoid shocks or dangerous leaks when replacing the hose. While these risks aren’t that likely when performing this repair, they may still occur. As a result, it is crucial to protect yourself in this way. You may also want to wear rubber boots and gloves to ground yourself while doing these repairs.

4. Remove the Old Hose

worker in blue overall repairing washing machine

After you have prepared yourself for this job, it is time to remove the old drain hose from its mounting. Start by locating the clamps that hold the hose to the back of the machine. These should easily unscrew and allow you to pop the hose off the mountings. Use the pliers to hold the clamps tightly and use the screwdriver, if needed, to pry it open.

Remove both clamps and pull the hose off of the machine. Check the clamps for any signs of visible rusting. If they are in bad shape, you may need new ones. That’s why it’s always wise to own a few replacement clamps when starting this process. Clean out the area around the hose connection to ensure it isn’t too dirty for replacement. Wipe it down with a damp cloth, if necessary, to keep it nice and clean.

6. Add the New Drain Hose

After removing your old drain hose, it is time to add the new one. Thankfully, this step is pretty simple. Place the clamps on each end of the hose and slide it into place on the coupling. This clamp will help keep your hose down and make sure that it doesn’t slide off. Now, slide the ends of the drain hose over the coupling.

The hose should fit snugly over these areas without being too tight to adjust. Push them as far back on the coupling as possible to ensure they snap shut. You should hear a click when you push to ensure you have made it. After driving them into place, tighten the clamps with your wrench to keep them tight. This last step makes sure that no water leaks while you wash your clothes. At this point, you should be well aware of how to install a washing machine drain hose.

7. Finishing up

After you have gotten the hose on your machine, you can plug it back in and turn on the water. Open up the water to see how it flows through the tube. There should be no leaks around the edges of the hose.

If you find that there are any leaks, make sure to readjust them and tighten the clamps. This step will ensure that your machine runs as smoothly as possible. While there’s a small chance of some manufacturer defects causing this problem,some of them are usually caused by slight human error.

In Conclusion

As you can see, learning how to install a washing machine drain hose isn’t impossibly difficult. While it will require some careful work and the right tools, it can still be managed if you know what you are doing. By following these steps, you will be safe from any mistakes that can sneak in and interfere with your hard work.

If you need to know more about how to install a washing machine drain hose, please don’t hesitate to contact us today. You can also share any other tips on this process that you may know. By sharing this article with friends and family members, you can ensure they know how to maintain this vital appliance.

Image source: 1, 2

Pin It on Pinterest